Hase Lagos User Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 46
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
35
Atahighercombustiontemperature,thisone-time
processcantakebetween4to5hours.
To achieve this higher combustion temperature,
please increase the fuel quantity recommended
in Section 9, „Adding Fuel/Heatingwith Nominal
ThermalOutput“,byapproximately25%.
CAUTION!
To prevent adverse effects on health, no-
body should stay in the room(s) during
this process unless absolutely necessary.
Make sure the room is well-ventilated and
open the windows and outside doors. If
needed, use a fan for faster air circula-
tion.
If the maximum temperature is not reached dur-
ingtherstheatingoperation,youmaynoticean
odourforashortperiodoftimethenexttimethe
stoveisusedaswell.
8. Lighting the Fire
Thering upphaseshouldbeasshortaspossi-
ble,sincehigheremissions canoccurduringthis
phase.
TheslidersettingsdescribedinTable1(seegure
on the right) are recommendations that were de-
terminedunderconformancetestingconditions,in
compliancewiththerelevantstandard.Depending
ontheweatherconditionsandthedraughtcapabil-
ity of your chimney, accordingly adjust the slider
positionsforyourLagostothelocalconditions.
CAUTION!
The Lagos may only be operated when the
re box door is closed; the re box door
may only be opened to add fuel.
WARNING!
Never use spirits, petrol, or other amma-
ble uids to light the stove.
Lighting the Fire
Procedure Position of Control
Elements
Completelyopenprimary
andsecondaryair.
Pullprimary(I)and
secondaryairslider(II)all
thewayout.(g.6).
Openregrate. Pulloutregrateslider.
Pileupanyremainingash
andunburnedCharcoal
intothecentreofthe
combustionchamber.
Place2-3smalllogsinto
themiddleoftherebox;
stackapprox.0.5kgof
drywoodchipsontop.
Lighttheignitionmaterial
atseveralplaces.
Tab. 1
fig. 6
(I)
(II)
9. Adding Fuel / Heating at
Nominal Thermal Output
More fuel should be added to the re when the
ames from the previous burningoff phase have
justgoneout.
Adding Fuel / Heating at Nominal Output
Procedure Position of
Control Elements
Adjustprimaryand
secondaryair.
Closeprimaryairslider
(I),setsecondaryair
slider(II)toposition2
(g.7).
Closeregrate. Pushinregrateslider.
Addtwologsweighing
approx.1,4kgintotal.
Placelogswithoneend
tothefrontofrebox.
Onlyaddasinglelayer
offuel.
Tab. 2
fig. 7
(I)
(II)
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 45 46

Comments to this Manuals

No comments